Learning Library · Amateur radio · 8
Hunting RF noise with a near-field probe
The S9 hash on 40 m is coming from somewhere in the house. A near-field probe on a spectrum analyzer only picks up what is a few centimetres to a metre away, so it turns a vague noise problem into a search you can win: get close, watch the spectrum, and match the shape to the device.
Tap the floor plan, or use the sliders, to move the probe. Bottom: what the analyzer shows from 0 to 30 MHz. Source levels and the rate the field falls with distance are illustrative; real near fields fall faster still, so a real search is closer than this map suggests.
Why near-field probes work
An antenna hears everything for blocks around. A near-field probe is a small loop or stub that couples to the magnetic or electric field right next to a circuit, and that field falls away very quickly with distance. Move the probe from a metre away to a few centimetres and a noise source can rise by tens of dB, while everything else stays put. The loudest spot is the source.
Every noise source has a shape
| Source | What it looks like on the analyzer |
|---|---|
| Switching charger or wall adapter | A comb of harmonics of its switching frequency, strongest at the low end and falling with frequency |
| LED lamp driver | A broad hump of hash, often a few MHz wide |
| Variable-speed motor drive, such as a pool pump | Very strong at low frequencies, falling steeply toward the upper HF bands |
| Switching power supply in the shack | Broadband noise across all of HF, with a fine comb on top |
Try this
- Start in the middle of the house. Everything is weak and mixed together; the probe is too far from all of them.
- Tap next to the kitchen lamp. The hump around 2.5 MHz rises above the rest and the readout names the lamp.
- Turn the shack PSU off and watch the 40 m level near the desk drop. Switching suspects off one at a time, at the breaker if need be, confirms what the probe found.
A portable AM radio is a good first step to find the right room; the probe and analyzer then find the device and tell you what it is. UNI-T's near-field probe kits cover 9 kHz to 50 MHz (UTS-EMI02), which spans all of HF, and 30 MHz to 3 GHz (UTS-EMI01). A preamplifier and a narrow resolution bandwidth help with weak sources; see reading a spectrum analyzer.
Find it, name it, fix it. Near-field probe kits for HF and up.
See the UTS-EMI02 probe kitUNI-T Learning Library. Design. Debug. Deploy.™


